Winter Safety Jacket

WINTER SAFETY JACKET

 

Field Deployment Brief (Operations + Procurement Edition)

1) Mission Profile

Item: Winter Safety Jacket
Primary goal: keep workers visible + warm + protected during winter operations where weather and low visibility increase incident risk.
Typical deployments: roadwork, traffic control, municipal crews, mining sites, outdoor logistics yards, snowfield tasks.

---

 

2) Standard & Visibility Configuration

 

Visibility level: Class 3 program layout available (layout verification required)

Standards supported by configuration: ANSI/ISEA 107 Class 3 / EN ISO 20471 Class 3

Reflective system: 50mm (5cm) high reflective tape

Layout method: buyer layout / supplier proposal for approval

Procurement note: Class level is validated by tape area + placement + garment size range + testing, not by tape width alone.

---

 

3) Winter Weather Protection System

 

Outer shell: Oxford fabric + PU coating
Purpose: water resistance + abrasion durability in work environments
Waterproof build choices (set in PO):

seam sealing: none / critical / full

zipper solution: standard / water-resistant / storm flap

Wind blocking: cuff/hem sealing features reduce wind pumping and snow entry.

---

 

4) Thermal System (Cold-Region Use)

 

Insulation: thickened thermal padding (hot-melt cotton)
Use reference: -25°C to -35°C under moderate activity
Wear guidance: layer with base/mid for stationary work or strong wind/humidity conditions.

---

 

5) Sizing & Workforce Coverage

 

Size range: S–5XL
Ordering practice: provide a size ratio for teams to reduce exchange requests and restock delays.

---

 

6) OEM / Identification & Program Control

 

Branding options: heat transfer / embroidery / screen print
Traceability options: barcode label, batch code, carton marks
Uniform program support: stable repeat supply with locked fabric/tape/trim specs.

---

 

7) Receiving Inspection (Minimum Acceptance Checks)

 

On arrival, verify:

reflective tape alignment and edge condition

seam integrity and leak points at zipper/hood junction (if waterproof required)

insulation evenness (no clumping or thin areas)

zipper smoothness, including low-temperature handling if specified

labeling accuracy and size tolerance

fluorescent color consistency across cartons

---

 

8) RFQ Message (Copy & Send)

 

Item: Winter Safety Jacket

Standard: ANSI/ISEA 107 Class __ / EN ISO 20471 Class __

Reflective: 50mm tape; layout notes __

Shell: Oxford + PU; seam sealing none/critical/full; zipper __

Insulation: hot-melt cotton; target temp range __

Color: yellow/orange (Pantone __)

Quantity: __ pcs; size breakdown __

Logo: method __; placement __; artwork attached

Packaging: polybag / barcode / hangtag / carton marks

Delivery: destination __; required date __

 

 

 

 

 

 

Hot Tags: winter safety jacket, China, manufacturers, suppliers, factory, buy