Home / Products / Safety Workwear / Safety Jackets / Details

Hi Vis Insulated Jacket

OEM hi vis insulated jacket spec sheet for bulk orders. Define Class 3 visibility layout, waterproof build options, insulation, sizes S–5XL, branding, packaging and QC checks.

Send Inquiry Chat Now

Product Introduction

Hi Vis Insulated Jacket

Technical Schedule (Tender / PO Annex)

0. Item Identification

0.1 Item Name: Hi Vis Insulated Jacket
0.2 Category: Hi-Visibility Safety Outerwear / PPE Jacket
0.3 Intended Use: Cold-weather outdoor work; low-visibility environments
0.4 Supply Mode: OEM / Private Label / Bulk

1. Visibility Requirement

1.1 Visibility Program Target (select):

□ ANSI/ISEA 107 Class 3

□ EN ISO 20471 Class 3

□ Other: __________

1.2 Reflective Layout Requirement:

□ Buyer provides layout artwork

□ Supplier proposes layout for approval

Notes: _______________________________________

1.3 Compliance Condition: Final class is dependent on tape area, placement, background color, garment sizing, and test verification.

2. Reflective Material Specification

2.1 Reflective Tape Width (select):

■ 50 mm (5 cm) standard

□ 25 mm

□ 70 mm

□ Custom: _____ mm

2.2 Tape Type (select):

□ Sewn-on reflective tape

□ Heat-transfer reflective tape

□ Other: __________

2.3 Tape Performance Requirement (buyer to define if required):

Luminance / Retroreflectivity target: __________

Wash durability target: __________ cycles @ ______ °C

3. Shell Fabric System

3.1 Shell Fabric: Oxford (polyester-based)
3.2 Coating: PU coating
3.3 Shell Weight / Denier (if required): __________
3.4 Water Resistance Acceptance (select):

□ Standard water resistance (no seam sealing)

□ Critical seam sealing

□ Fully taped seams

□ Target waterproof rating (mmH₂O): __________

3.5 Wind Blocking Requirement:

□ Yes (structure + closures)

□ Not required

4. Insulation System

4.1 Insulation Type: Hot-melt cotton thermal padding
4.2 Insulation Weight (if required): __________ gsm
4.3 Thermal Use Range (reference): -25°C to -35°C under moderate activity
4.4 Thermal Acceptance Condition: Comfort depends on wind, humidity, layering, and activity level.

5. Design & Components

5.1 Hood:

□ Hooded

□ Detachable hood

□ No hood

5.2 Front Closure:

□ Standard zipper

□ Water-resistant zipper

□ Zipper + storm flap

□ Other: __________

5.3 Cuffs & Openings (select):

□ Tightened cuffs (snow/rain blocking)

□ Elastic cuffs

□ Velcro adjustment

□ Other: __________

5.4 Pockets (select):

□ Standard side pockets

□ Chest pocket

□ Inner pocket

□ Zipper pockets

Pocket notes: _______________________________

6. Color & Appearance

6.1 Color (select):

■ Yellow

■ Orange

□ Custom (Pantone): __________

6.2 Color Consistency Requirement:

□ Standard commercial tolerance

□ Tight tolerance for uniform programs (buyer spec): __________

7. Size Range & Fit

7.1 Size Range: S–5XL
7.2 Fit Block (select):

□ Regular

□ Relaxed

□ Athletic
7.3 Measurement Tolerance: ± _____ cm
7.4 Size Breakdown Provided by Buyer: □ Yes / □ No

8. Branding, Labeling, Traceability

8.1 Logo Method (select):

□ Heat transfer

□ Embroidery

□ Screen print

□ Other: __________

8.2 Labels (select):

□ Private label neck label

□ Care label

□ Size label

□ Barcode label

8.3 Traceability (if required):

Batch code: □ Yes / □ No

Carton marking rules: ________________________

9. Packing & Logistics

9.1 Individual Packing: □ 1pc/polybag / □ other: ________
9.2 Single Pack Reference: 33 × 32 × 10 cm; 1.5 kg (if applicable)
9.3 Carton requirement: __________
9.4 Documentation: Packing list / invoice / label file: □ buyer provides □ supplier provides

10. Quality Control & Acceptance

10.1 Inspection Standard (select):

□ AQL __________

□ Buyer QC checklist

□ Third-party inspection

10.2 Mandatory Incoming Checks (minimum):
a) Reflective tape placement accuracy & edge condition
b) Seam integrity at stress points and leak points (if waterproof required)
c) Insulation evenness (no clumping/thin zones)
d) Zipper smoothness (including cold condition check if requested)
e) Size/label correctness
f) Fluorescent color consistency across cartons

10.3 Rejection Criteria (buyer to define if needed):

Tape edge lift beyond: ________

Size deviation beyond: ________

Major defects list: ___________________________