ECE 104 Reflective Rear Marking Plate

This ECE 104 reflective rear marking plate is designed for heavy vehicle rear warning, truck conspicuity marking, trailer safety marking, road transport fleets, traffic safety suppliers, and commercial vehicle retrofit programs. The product uses micro-prismatic reflective construction with red fluorescent material and yellow retroreflective material to improve rear vehicle recognition during night driving, roadside parking, loading yards, and highway operation.

The standard size is 135mm × 565mm, with 195mm × 565mm and customized sizes available according to fleet, trailer, or market requirement. Material options include PET/acrylic reflective film and aluminum backing, with aluminum, metal, and plastic substrates supported depending on installation method. The rear reflector sticker is supplied with pressure sensitive adhesive and release liner, while the pre-sealed edge design helps protect the reflective construction during outdoor use.

Xiamen Topmatched supports ECE70 / ECE REG 70 rear marking plate supply, E-mark / DOT-C2 certified product options, silk screen printing, black lettering, OEM/ODM packing, carton mark customization, and bulk shipment for traffic safety distributors. The common color combinations include red/yellow and fluorescent orange/yellow, with yellow, white, and red reflective color options for different road safety marking programs. Free samples can be provided for qualified buyers before order confirmation.

Quality control starts with raw material verification. The QC team checks PET/acrylic reflective film, micro-prismatic surface condition, aluminum substrate flatness, adhesive coating, release liner quality, color consistency, surface scratches, roll damage, and edge condition before conversion. For ECE70 rear truck marker boards, the red fluorescent area, yellow reflective area, black lettering, and chevron pattern must match the approved sample and required regulation layout.

During production, inspectors check size tolerance for 135mm × 565mm and 195mm × 565mm plates, cutting accuracy, corner shape, edge sealing quality, adhesive lamination, surface cleanliness, printing position, and reflective panel alignment. Pre-sealed edges are reviewed to reduce peeling risk and protect the reflective film structure during transport, storage, and outdoor vehicle use.

Reflective performance control focuses on the micro-prismatic construction, visible brightness, color separation, red/yellow contrast, surface clarity, and consistency across the batch. Waterproof and weather-resistant performance should be confirmed according to the buyer's target warranty requirement, especially for fleets exposed to rain, road dust, washing, temperature changes, and long highway operation.

For E-mark, DOT-C2, ECE70, or ECE REG 70 controlled orders, buyers should confirm the required certificate file, marking details, substrate type, adhesive requirement, and installation market before production. Finished goods are inspected for wrong size, incorrect pattern, scratches, dents, weak adhesive, damaged release liner, poor print, missing pack quantity, carton damage, and shipping mark errors.

This ECE 104 reflective rear marking plate is suitable for heavy trucks, trailers, semi-trailers, commercial transport vehicles, logistics fleets, road maintenance trucks, construction material transport vehicles, municipal service fleets, emergency roadside vehicles, trailer manufacturers, truck body builders, and vehicle safety retrofit programs.

For fleet operators, rear reflective markers support vehicle conspicuity during night driving, loading dock operation, roadside parking, and low-light highway movement. For traffic safety distributors and trailer parts suppliers, the product can be supplied as 2 pcs per pack with standard size, custom size, printable surface, carton label, and OEM packing.

Rear reflective markers are normally fitted at or near the rear of the vehicle and secured so that no part projects beyond the outermost edge. The lower edge should be horizontal and positioned within the required height range specified by the applicable regulation, commonly not more than 1,700mm and not less than 400mm above the ground. When one marker or a pair of markers is used, placement should be as near as practicable to the outermost edge of the vehicle according to the target vehicle regulation.

Can this rear marking plate be supplied with E-mark or DOT-C2 certification?

Yes. E-mark and DOT-C2 certified options can be supplied when the buyer confirms the destination market, regulation type, size, color layout, substrate, and required document file before production. Certification requirements must be aligned with the approved sample and bulk order specification.

Can the rear reflector sticker be customized with printing or black lettering?

Yes. The surface supports silk screen printing and black lettering for regulated rear truck marker boards. Buyers should provide artwork, lettering position, print size, and packing requirements before sampling. Printing quality, adhesion, color separation, and pattern alignment are checked before bulk shipment.

Is the pressure sensitive adhesive suitable for outdoor truck and trailer use?

Yes, pressure sensitive adhesive with release liner is used for vehicle marking applications, but final performance depends on substrate type, installation surface, cleaning method, temperature, and outdoor exposure. For long-term fleets, aluminum, metal, or plastic substrate selection should be confirmed before order approval.

Send your required regulation type, plate size, substrate, color pattern, adhesive requirement, certificate request, printing details, packing method, and bulk quantity. Xiamen Topmatched can review the ECE reflective rear marking plate specification and provide a wholesale quote, free sample arrangement, and delivery plan within 12 hours.