Sew-on retro-reflective material with TC or polyester backing, 1–140cm width, >400CPL reflectivity, and washable performance for PPE and OEM textile programs

Retro-reflective material is a sew-on reflective fabric used on safety clothing, workwear, bags, caps, gloves, uniforms and visibility-related textile products. This product uses TC backing fabric, 80% polyester / 20% cotton, or 100% polyester backing according to buyer requirements. The standard color range includes silver and grey, with roll width options from 1cm to 140cm for garment panels, reflective strips, trim components, badge areas and custom cutting programs.

The material can be supplied with different reflective coefficient levels, including >400CPL, >380CPL and >15CPL, depending on end-use, target market and compliance positioning. Washing performance options include 25 cycles at 60℃, 50 cycles at 60℃, and 30 cycles at 90℃, which allows buyers to match material durability with uniform washing plans, PPE replacement cycles and industrial textile requirements.

This retro-reflective material is designed for sew-on attachment rather than heat-transfer application. It is suitable for high visibility safety garments, reflective jackets, warning vests, work pants, school accessories, outdoor textile products and OEM reflective fabric tape conversion. As a China retro-reflective material manufacturer and wholesale supplier, our factory can support customized width slitting, sample review, low MOQ development, free sample checking where applicable, packaging adjustment and bulk roll supply for PPE and textile buyers. Product data should be confirmed against the required garment standard, wash method and final sewn construction before mass production.

Reflective Grade Selection for Sew-On Textile Programs

Different reflective coefficient levels should not be selected only by price. The intended product, inspection standard, washing frequency and required nighttime recognition distance all affect material selection. A high-reflectivity grade can be used for safety garments and PPE programs, while lower reflective values may be used for decorative, promotional or non-regulated visibility products.

Quality control for retro-reflective material should focus on reflective coefficient consistency, backing fabric stability, surface uniformity, width tolerance, wash durability, sew-on performance and roll packing condition. Incoming backing fabric should be checked for composition, fabric density, surface defects and color consistency. The reflective layer should be inspected for scratches, dark spots, coating marks, uneven brightness and visible contamination.

For width-controlled orders, slitting accuracy is important. A 5cm garment tape, a narrow piping component and a wide reflective panel have different tolerance requirements. Roll edge condition should be checked after slitting to avoid fraying, curling or sewing difficulty during garment production. The sew-on backing must support stable stitching without excessive needle damage, puckering or edge deformation.

Reflective coefficient testing should be confirmed according to the buyer's target market and required inspection method. Washing tests should be reviewed by cycle count, water temperature and detergent conditions. The source page lists wash options of 25 cycles at 60℃, 50 cycles at 60℃ and 30 cycles at 90℃; these values should be matched with the final garment care label and sewn construction before bulk approval.

How should buyers choose between >400CPL and >380CPL retro-reflective material?

Buyers should select the reflective coefficient according to end-use, target standard and nighttime visibility requirement. >400CPL is better for high-visibility PPE programs, while >380CPL can suit many safety garment and accessory applications. Final approval should follow buyer testing and garment design.

Can this retro-reflective material be used for heat transfer application?

No, this product is positioned as sew-on retro-reflective material. It should be attached by stitching onto fabric, garments or textile accessories. If the project requires heat press application, buyers should request heat-applied reflective tape or segmented reflective transfer material instead.

What wash performance should be confirmed before bulk orders?

Buyers should confirm required wash temperature, cycle count, detergent conditions and finished-garment care label. Available options include 25 cycles at 60℃, 50 cycles at 60℃ and 30 cycles at 90℃. Sample testing should be completed before bulk garment production.

Need sew-on retro-reflective material for a PPE or textile production program? Send your target reflectivity, width, backing fabric, wash-cycle requirement, roll quantity and application method through the RFQ form below so our factory team can check sample availability, slitting feasibility and bulk supply details.