Reflective Thermal Transfer Film

Reflective Thermal Transfer Film

Reflective thermal transfer film for workwear
3M heat transfer tape, silver color
5cm width for high visibility garments
0.15mm thickness, 100 meters per roll
Customizable specifications for OEM orders
For first responders and safety clothing
China factory supply for wholesale buyers
Suitable for heat press garment application

Product Introduction

Product Overview & Customization Capabilities

Reflective Thermal Transfer Film is used for applying reflective strips, panels, logos, or marking zones onto safety clothing, uniforms, bags, gloves, caps, rainwear, and other textile-based safety products. This product page lists the item as 3M heat transfer tape, with customizable specifications, 5cm width, 0.15mm thickness, silver color, and 100 meters per roll packing.

For PPE brands, garment factories, safety workwear distributors, and first responder uniform buyers, this reflective thermal transfer film supports high-visibility garment production where sew-on tape is not the preferred application method. It can be specified for OEM workwear programs, private-label safety clothing, traffic control apparel, emergency service garments, and reflective accessory production.

As a China reflective thermal transfer film manufacturer and supplier, Xiamen Topmatched can support wholesale roll supply, customized width, buyer-required packaging, logo-related reflective applications, and matching with different garment base fabrics after sample testing. Buyers should confirm fabric type, heat press temperature, pressure, time, wash requirement, and target reflective performance before bulk order approval.

reflective-thermal-transfer-film-manufacturer

Material & Technical Specifications


Specification Item

Details

Product Name

Reflective Thermal Transfer Film

Listed Product Name

3M Heat Transfer Tape

Product Category

Reflective Material / Heat Transfer Film

Main Application

Safety workwear, first responder uniforms, reflective garment trims, bags, caps, gloves, rainwear

Recommended Industry

First Responders

Specifications

Customizable

Width

5cm

Thickness

0.15mm

Color

Silver

Attachment Type

Heat transfer application; original page also lists "Sew On" and should be confirmed before order

Packing

100 meters / roll

Reflective Surface

Silver reflective finish

Fabric Compatibility

Polyester, cotton, TC, Oxford, softshell, rainwear fabric, and other textile bases after sample testing

Application Method

Heat press transfer; temperature, pressure, and time depend on fabric and adhesive layer

Customization Options

Width, roll length, packing label, application requirement, reflective logo or strip format

Buyer Type

PPE brands, safety garment factories, uniform suppliers, reflective material distributors

Bulk Supply Positioning

Wholesale reflective thermal transfer film from China factory

5cm-silver-reflective-thermal-transfer-film

Quality Control & Certifications


Quality control for reflective thermal transfer film must focus on reflective brightness, adhesive bonding, roll consistency, edge cutting, heat press stability, wash resistance, and compatibility with the buyer's fabric. For safety workwear production, the film should be tested on the exact garment fabric before bulk cutting or garment assembly.

For first responder garments and high-visibility workwear, buyers should confirm whether the final garment must meet EN ISO 20471, ANSI/ISEA 107, or an internal uniform specification. Reflective film performance alone does not automatically certify the finished garment; the final garment design, reflective area, placement, background fabric, and washing performance all affect compliance.

Typical QC steps include incoming roll inspection, width measurement, thickness check, reflective surface inspection, heat press trial, peel strength review, washing test, color shade comparison, roll length verification, and packing inspection before shipment.

oem-reflective-thermal-transfer-film-heat-press-test


Recommended QC Checklist for Bulk Orders

QC Item

Inspection Focus

Width Accuracy

Confirm 5cm or customized width tolerance

Thickness Check

Verify 0.15mm target thickness

Roll Length

Confirm 100 meters per roll or buyer-required packing

Reflective Brightness

Check silver reflective surface and batch consistency

Surface Defects

Inspect scratches, black spots, creases, coating gaps, and contamination

Heat Press Bonding

Test temperature, pressure, time, and fabric compatibility

Peel Strength

Check adhesion after cooling and repeated bending

Wash Resistance

Test according to buyer's garment washing requirement

Edge Cutting

Confirm clean edge, no burrs, no uneven slitting

Packing

Verify roll wrapping, label, carton mark, and batch traceability


Typical Application Scenarios

Application Scenario

Buyer Intent Covered

First Responder Uniforms

Reflective thermal transfer film for emergency service garments

Road Construction Workwear

Silver reflective strip for high-visibility jackets and trousers

Traffic Control Safety Gear

Heat transfer reflective tape for vests and rainwear

Industrial Safety Clothing

Reflective film for workwear factories and PPE distributors

Police / Security Outerwear

Reflective garment marking for uniform programs

Fire Service Support Apparel

Reflective trim for selected non-FR or specified uniform applications

Reflective Rain Jackets

Heat transfer film for PU/PVC coated rainwear after fabric testing

Safety Bags and Backpacks

Reflective strip or logo transfer for soft goods

Reflective Caps and Gloves

Small-area reflective heat transfer marking

OEM Garment Production

Bulk roll material for private-label safety clothing factories



FAQ

Can this reflective thermal transfer film help a finished garment meet EN ISO 20471 or ANSI/ISEA 107?

It can be used as part of a compliant garment, but the film alone does not certify the finished item. Compliance depends on reflective area, placement, background fabric, garment class, washing performance, and final test reports. Confirm the target standard before sampling.

How should a factory control bonding strength when applying this 5cm reflective film?

Bonding strength depends on fabric type, heat press temperature, pressure, time, and cooling process. Buyers should test the film on the exact fabric before mass production. After pressing, check peel strength, edge lifting, bending resistance, and washing performance before cutting bulk garment panels.

Is the 0.15mm silver reflective thermal transfer film suitable for rainwear or coated fabrics?

It may be suitable after application testing, but coated fabrics need special attention. PU, PVC, Oxford, and waterproof textiles can react differently under heat and pressure. A pre-production trial should check surface damage, adhesive bonding, reflective brightness, and wash or wipe resistance.



Send your target width, base fabric type, heat press conditions, washing requirement, roll quantity, and destination market. Our reflective material team can review the application risk and prepare a factory quotation for wholesale Reflective Thermal Transfer Film orders.


Hot Tags: reflective thermal transfer film, China, manufacturers, suppliers, factory, buy

You Might Also Like

(0/10)

clearall