OEM PU Reflective Vinyl Roll for Garment Logo Printing and Heat Press Application

Heat Transfer Reflective Material is a PU-based reflective vinyl designed for clothing, T-shirts, garment logos, sportswear, workwear decoration and custom apparel printing. The material is supplied in roll form and applied by heat press at controlled temperature, time and pressure. It is suitable for reflective vinyl print, garment branding, event apparel, safety-related clothing decoration and OEM logo transfer projects. Xiamen Topmatched supplies heat transfer reflective material for wholesale, OEM and supplier customized orders from China.

Standard roll sizes include 50cm × 25m and 50cm × 50m, which are suitable for cutting plotters, logo sheets and bulk garment printing workshops. The listed thickness is 0.1mm, giving the reflective vinyl a thin profile for T-shirts, uniforms and other fabric surfaces. Transfer parameters are 150-160°C, 10-15 seconds and 0.3-0.5MPa pressure, with both hot peeling and cold peeling methods available depending on production setting and fabric type. Brand name, color effect and reflective vinyl print layout can be customized according to buyer artwork, roll requirement and end-use market.

Quality control for heat transfer reflective material starts with film thickness, roll width, surface flatness, carrier film stability and reflective surface consistency. For a 0.1mm PU reflective vinyl, uniform coating and stable adhesive performance are important because garment factories need clean cutting, accurate weeding and reliable transfer during bulk pressing.

Heat press testing should confirm the listed production window: 150-160°C temperature, 10-15 seconds pressing time and 0.3-0.5MPa pressure. Test pieces are checked after hot peeling or cold peeling to confirm edge bonding, corner adhesion, surface cracking, lifting, carrier release and visible transfer marks. For reflective vinyl print used on clothing and T-shirts, washing resistance and flexing performance should be checked according to the buyer's garment care requirement.

For OEM orders, inspection can include roll length verification, width tolerance, color consistency, reflective appearance, cutting performance, adhesive strength, packing condition and sample comparison. If the material is used for workwear or safety-related garments, buyers should confirm the target reflective requirement, washing cycle expectation and any third-party testing needed for their destination market before mass order.

Heat Transfer Reflective Material is used by garment factories, T-shirt printers, uniform suppliers, sportswear brands, PPE distributors and promotional apparel producers. It is suitable for reflective logos, team names, numbers, decorative graphics, brand marks and safety visibility elements on fabric surfaces. The PU vinyl structure supports cutting and transfer work for both small sample orders and repeat wholesale production.

Typical end uses include custom T-shirts, school uniforms, sports team clothing, running apparel, event staff garments, workwear decoration, promotional clothing and reflective fashion graphics. For buyers who need low starting quantity, the MOQ of 1 roll and free sample option make it practical to test cutting, pressing and peeling performance before confirming a larger OEM heat transfer reflective vinyl order.

What heat press setting should be used for this reflective vinyl?

The recommended transfer window is 150-160°C, 10-15 seconds and 0.3-0.5MPa pressure. Buyers should still test on the actual garment fabric before bulk pressing. Fabric composition, coating, moisture content and machine calibration can affect edge bonding and peel performance.

Can this PU reflective vinyl be used for T-shirt logo cutting?

Yes. The 0.1mm PU reflective vinyl is suitable for garment logo cutting, T-shirt graphics and custom apparel decoration. Buyers should check cutting blade depth, weeding performance and corner detail before production. Fine artwork may require adjusted cutting speed and sample confirmation.

Should buyers choose hot peeling or cold peeling?

Both hot peeling and cold peeling are available, but the correct method depends on production setup, fabric type and logo size. Hot peeling may improve speed for simple graphics, while cold peeling can help stabilize larger designs. Test both methods before approving bulk production.